honda — Shift Arm/Neutral Switch

c. INSTALLATION [1] UNDER COVER FRONT BRACKET 1) Set the indicator light wire and the remote control cable in the specified positions in the remote control cable grommet. Be sure that the tie wires on the indicator light wire and the remote control cable are set against the remote control cable grommet. [2] WHITE TAPE 2) Set the starter cable in the specified position in the remote control cable grommet by aligning the end of the white tape on the starter cable with the end of the under cover front bracket as shown. [3] STARTER CABLE 3) Set the fuel tube A and the speed sensor tube A in the specified positions of the remote control cable grommet.

[4] TIE WIRES [5] REMOTE CONTROL CABLE [6] INDICATOR LIGHT WIRE [7] REMOTE CONTROL CABLE GROMMET [1] INDICATOR LIGHT WIRE [2] REMOTE CONTROL CABLE [3] SPEED SENSOR TUBE A [4] FUEL TUBE A [1] INDICATOR LIGHT WIRE [2] REMOTE CONTROL CABLE [5] STARTER CABLE [3] SPEED SENSOR TUBE A [6] REMOTE CONTROL CABLE GROMMET [5] STARTER CABLE [4] FUEL TUBE A 17-5