d. DISASSEMBLY OF SHIFT LINK BRACKET ASSEMBLY 1) Remove the throttle link. 2) Remove the throttle arm and remove the link pin. 3) Remove the shift link pin, link pin, shift slide pivot and the shift pivot plate. 4) Remove the throttle plate. 5) Check the two bushing As from the shift link bracket. If they are damaged, remove them and replace with the new ones. [3] THROTTLE PLATE [4] BUSHING A (2) [1] THROTTLE LINK [2] THROTTLE ARM [15] 6 mm WASHER [5] SHIFT LINK BRACKET 6 x 12 [6] 8 mm WASHER [14] 4 mm E-RING (3) [13] LINK PIN [7] 6 mm E-RING [12] PIVOT WASHER [8] SHIFT PIVOT PLATE [9] SHIFT SLIDE PIVOT [11] SHIFT LINK PIN [10] LINK PIN 17-15