honda — Electrical Equipment

9) Remove the gasket. [1] GASKET 10) Remove the overrunning clutch. [2] CLUTCH FORK 11) Remove the clutch fork. [1] OVERRUNNING CLUTCH • OVERRUNNING CLUTCH DISASSEMBLY 1) Secure the gear shaft by placing a wood block under the gear shaft assembly. [1] PIPE [I.D.: approx. 11mm (0.4 in), O.D.: approx. 15 mm (0.6 in), LENGTH: approx. 22 mm (0.8 in)] NOTICE Secure the gear shaft assembly with care not to contact the internal gear. 2) Prepare a pipe of the following dimensions. I.D.: approx. 11 mm (0.4 in), O.D.: approx. 15 mm (0.6 in), LENGTH: approx. 20 mm (0.8 in) [2] GEAR SHAFT 3) Set the pipe on the gear shaft stopper and drop the gear shaft stopper by tapping on the pipe.

[4] SNAP RING 4) Remove the snap ring using a screwdriver or equivalent tool. [3] WOOD BLOCK [5] GEAR SHAFT STOPPER 18-4