6. VALVE CLEARANCE [1] UNDER COVER GROMMET Inspection/Adjustment: Valve clearance inspection and adjustment must be performed with the engine cold. 1) Remove the engine cover (P. 4-2). 2) Move the remote control lever to the “N” (Neutral) position. 3) Set a screwdriver in the slot in the six mud guard clips, and raise the mud guard clips (P. 3-6). Remove the six mud guard clips. 4) Remove the under cover grommet. 5) Remove the PHC cover (P. 3-6). Remove the four ignition coils and the four spark plugs (P. 3-7). Remove the L./R. engine under covers (P. 4-9). [2] MUD GUARD CLIP (6) 6) Remove the two 6 x 22 mm flange bolts and remove the R. side cover bracket from the engine assembly. [1] R.
SIDE COVER BRACKET 6 x 22 (2) 7) Disconnect the breather tube and main wire harness from the cylinder head cover. Hold the main wire harness at the exhaust manifold side. [1] CYLINDER HEAD COVER [2] BREATHER TUBE [3] MAIN WIRE HARNESS 3-9