Komatsu PC210-6K — 6.GENERAL PRECAUTIONS

A WARNING: 6. GENERAL PRECAUTIONS PROTECTION For reasons of safety, always follow these safety precautions. AGAINST FALLING OR FLYING OBJECTS t if there is any danger of failing or flying objects hitting the operator, install protective guards in place to protect the operator as required for each particular situation. e@ For work with breakers, install a front guard sheet over the windshield. on the windshield. Also, place a laminate coating e@ For demolition or shear work, install a front guard on the windshield and a top guard on the cab. Also, place a laminate coating sheet over the windshield.

e@ For work in mines, tunnel or other places where there is danger of falling rocks, put FOPS (falling object protective structure) in place. Also, place a laminate coating sheet over the windshield. The above comments are made with regards to typical working conditions. should put on other guards if required by conditions at your particular site. For details of safety guards, please contact your Komatsu distributor. By all means you Also, even for other types of work, if there is any danger of getting hit by falling or flying objects, or of objects entering the operator’s cab, select and install a guard that matches the working conditions.

Be sure to close the front window before commencing work. When carrying out the above operations, make sure to keep all persons other than the operator outside the range of falling or flying objects. Be particularly sure to maintain a proper distance when carrying out shear operations. Too Front Front guard > guard (I) aN AB30050B AB30052B AB300518 AB30053B A0055201 A0084311 guard (full) 7 / sS oi 1-6