Komatsu PC210-6K — 6.GENERAL PRECAUTIONS

A WARNING: Failure to follow these safety precautions may lead to a serious accident. PRECAUTIONS 6. GENERAL PRECAUTIONS FOR ATTACHMENTS e@ When installing and using an optional attachment, read the instruction manual for the attachment and the information related to attachments in this manual. e@ Do not use attachments that are not authorized by Komatsu or your Komatsu distributor. Use of unauthorized attachments could create a safety problem and adversely affect the proper operation and useful life of the machine. e Any injuries, accidents, product failures resulting from the use of unauthorized not be the responsibility of Komatsu.

MACHINES attachments will WITH ACCUMULATOR On machines equipped with an accumulator, for a short time after the engine is stopped, the work equipment will lower under its own weight when the work equipment control lever is shifted to LOWER. After the engine is stopped, set the safety lock lever @ to the lock position and also lock the attachment pedal with the lock pin. When releasing the pressure inside the work equipment circuit on machines equipped accumulator, follow the procedure given in the inspection and maintenance section. Method of releasing pressure —~ See “11.18 The accumulator is filled with HANDLING high-pressure nitrogen with an ACCUMULATOR”.

gas, and it is extremely dangerous if it is handled in the wrong way. Always observe the following precautions. e@ Never make any hole in the accumulator or expose it to flame or fire. e Do not weld any boss to the accumulator. e@ When carrying out disassembly or maintenance of the accumulator, or when disposing of the accumulator, it is necessary to release the gas from the accumulator. A special air bleed valve is necessary for this operation, so please contact your Komatsu distributor. Gas in accumulator — See “11.18 HANDLING ACCUMULATOR”. AB30576B 1-7