24. SERVICE PROCEDURE If the track tension is not at the standard value, adjust it in the following manner. Adjustment AWARNING Grease inside the adjusting mechanism is under high pressure. Grease coming from plug @) under pressure can penetrate the body causing injury or death. For this reason, do not loosen plug @ more than one turn. Do not loosen any part other than plug (). Furthermore, do not bring your face in front of the plug @). If the track tension is not relieved contact your Komatsu distributor. by this procedure, please AN114600 When increasing tension Prepare a grease gun. 1. Pump in grease through 2. To check that the tension forward (7 - 8 m). 3. Check the track tension .
grease fitting @ with a grease gun. is correct, . again, and move . the machine . if the tension slowly . is not correct, AN114610 adjust it again. 4. Continue to pump in grease until S becomes 0 mm. If the tension is still loose, the pin and bushing are excessively worn, so they must be either turned or replaced. Please contact your Komatsu distributor. AM091260 3-34