Komatsu PC210-6K — 24.2 WHEN REQUIRED

24. SERVICE PROCEDURE When loosening tension AWARNING It is extremely dangerous to release the grease by any method except the procedure given below. If the track tension is not relieved by this procedure, please contact your Komatsu distributor. 1. Loosen plug @ 2. Turn 3. If the grease gradually to release the grease. plug G@) a maximum does avec of one turn. not come out smoothly, move the machine backwards and forwards a short distance. 4. Tighten plug @. 5. To check that the tension forward (7 - 8 m). 6. Check the track tension adjust it again.

24.2.5 CHECK is correct, again, ELECTRICAL and INTAKE move the machine if the tension AIR slowly is not correct, HEATER Before the start of the cold season (once a year), contact your Komatsu distributor to have the electrical intake air heater repaired or checked for dirt or disconnections. 3-35