Komatsu PC210-6K — 24.3 CHECK BEFORE STARTING

24. SERVICE PROCEDURE 24.3.3 CHECK FUEL LEVEL, ADD FUEL AWARNING When adding fuel, never let the fuel overflow. This may a fire. If spilling fuel, thoroughly clean up any spillage. 1. Open 2. When fuel filler cap © is opened, float gauge © will rise according to the fuel level. Check that the fuel tank is full. Check by looking into the tank and by using float gauge @. 3. e e fuel filler cap © cause of the fuel tank. If the tank is not full, add fuel through the fuel filler until float gauge © rises to the maximum position. Fuel tank capacity: 3402 (89.8 US gal, 74.8 UK gal) Position of tip of float gauge @ when tank is full: Approx. 130 mm (5.1 in) from top surface of fuel tank WE iL (F) 4.

After adding fuel, push float gauge @ straight down with fuel filler cap ©. Be careful not to get float gauge © caught in the tab @ of fuel filler cap ©, and tighten fuel filler cap © securely. AWI54620 “= a 130 NOTICE For details of the fuel to use, see “20. USE OF FUEL, COOLANT AND LUBRICANTS ACCORDING TO AMBIENT TEMPERATURE”. \ NE ™ a AW354630 (2) Back face (2) REMARK If breather hole @ on the cap is clogged, the pressure in the tank will drop and fuel will not flow. Clean the hole from time to time. AW35 4238 3-45