24. 24.3.5 CHECK AIR CLEANER FOR 1. Confirm 2. If it flashes, immediately clean For details CLOGGING that the air cleaner clogging of the CHECK, CLEAN method AND of SERVICE PROCEDURE monitor does not flash. or replace the element. cleaning the REPLACE AIR CLEANER element, see “24.2.1 ELEMENT”. AD313590 24.3.6 CHECK ELECTRIC WIRINGS AWARNING If the fuse blows frequently, or there are traces of shortcircuiting in the electric wiring, always locate and repair the cause. Check for damage of the fuse and any sign of disconnection or short circuit in the electric wiring. Check also for loose terminals tighten any loose parts. Check the following points carefully.
e Battery e Starting motor e Alternator Please contact your Komatsu rection of the cause. and distributor for investigation and cor- A WARNING Accumulation of flammable material (dead leaves, twigs, grass, etc.) around the battery may cause fire, so always check and remove such material. When carrying out walk-around checks or checks before starting, always check if there is any accumulation of flammable material around the battery, and remove such flammable material. 3-47