24. SERVICE PROCEDURE 24.5.3 CHANGE OIL IN ENGINE OIL PAN, REPLACE ENGINE OIL FILTER CARTRIDGE AWARNING The oil is at high temperature after the engine has been operated, so never change the oil immediately after finishing opera- tions. Wait for the oil to cool down before changing it. Prepare the following e@ Container to catch e@ Refill capacity: 24 2 (6.34 US gal, 5.28 UK gal) drained oil: Min @ Filter wrench 1. Place a drain container bottom of the machine. 2. Loosen drain cock ® drain the oil. 3. Check the drained oil, and if there are excessive metal particles or foreign material, please contact your Komatsu distributor. 4. Install drain cock ®. 5. Open the engine hood.
Using the filter wrench from the upper side of the engine, turn filter cartridge @) counterclockwise to remove it. In particular, if this operation is carried out immediately after stopping the engine, a large amount of oil will come out, so wait under 24 @ capacity drain cock ® located on the slowly to avoid getting oil on yourself, and for 10 minutes before starting the operation. 6. Clean the filter holder, coat the packing surface of a new filter cartridge with engine oil (or coat it thinly with grease), then install it to the filter holder. REMARK Confirm that no remnants of old packing still adhere to the filter holder as this may result in oil leakage. 7.
When installing, tighten until the packing surface contacts the seal surface of the filter holder, then tighten it up 3/4 of a turn. 3-54 Cock Portion P Aw354578