Komatsu PC210-6K — 24.5 EVERY 250 HOURS SERVICE

24. 24. SERVICE PROCEDURE 8. After replacing the filter cartridge, filler © until the oil level add engine is between the H oil through and L marks SERVICE PROCEDURE oil on & dipstick @. NOTICE For details of the oil to use, see “20. USE OF FUEL, COOLANT AND LUBRICANTS ACCORDING TO AMBIENT TEMPERATURE”. 9. AD313780 Run the engine at idling for a short time, then stop the engine, and check that the oil level is between the H and L marks on the dipstick. For details, see "24.3 CHECK BEFORE STARTING". NOTICE Even if the machine has not been operated for 250 hours, the oil and filter cartridge must be replaced when the machine has been operated for 6 months.

In the same way, even if the machine has not been operated for 6 months, the oil and filter cartridge must be replaced when the machine has been operated for 250 hours. If optional oil filter cartridge, replace the cartridge at every 500 hours service. 24.5.4 LUBRICATE SWING CIRCLE (2 POINTS) SS 1. Lower the work equipment to the ground. 2. Using a grease gun, pump shown by arrows. in grease through the grease fittings After greasing, wipe off all the old grease that was pushed TRS | out. A AN114800 3-55