Komatsu PC210-6K — 7.2 AFTER STARTING ENGINE

@ WARNING: For reasons of safety, follow these safety precautions. 7. PRECAUTIONS DURING OPERATION — WORKING ON LOOSE always GROUND e@ Do not operate the machine on soft ground. It is difficult to get the machine out again. e Avoid operating your machine too close to the edge of cliffs, overhangs, and deep ditches. If these areas collapse under the mass or vibration of your machine, it could fal! or tip over and this could result in serious injury or death. Remember that the soil after heavy rain, blasting, or earthquakes is weakened in these areas. e@ Earth laid on the ground and the soil near ditches is loose. It can collapse vibration of your machine and cause your machine to tip over.

under the mass or @ Install the head guard (FOPS) when working in areas where there is danger of falling stones. e Install the ROPS and wear the seat belt when working in areas where there is danger of falling rocks or of the machine turning over. — PRECAUTIONS WHEN WORKING ON SLOPES e When working on slopes, there is danger that the machine may lose its balance and turn over when the swing or work equipment are operated. Always carry out these operations carefully. e Do not swing the work equipment from the uphill side to the downhill side when the bucket is loaded. This operation is dangerous.

e If the machine has to be used on a slope, pile the soil to make a platform that will keep the machine as horizontal as possible. Piled soil on slope — See “12.13 PRECAUTIONS WHEN TRAVELING UP OR DOWN HILLS”. INCORRECT CORRECT Platform AN113040 AN113050