11. 3. HYDRAULIC EXPLANATION OF COMPONENTS OIL LEVEL This warns that the hydraulic oil level is too low. If the monitor lamp flashes, check the hydraulic oil level, and add oil. AD313340 4. REPLACEMENT OF ENGINE OIL (For only set machines) If the set time (125, 250, 500H) passes after the engine oil is replaced, this lamp lights up. At this time, replace the engine oil. lf you want to change the set time for replacement of oil, consult your Komatsu distributor. AD313380 11.1.2 B: CAUTION ITEMS A CAUTION If the caution monitor lamp flashes, repair the problem as soon as possible. 1. CHARGE LEVEL This monitor indicates an abnormality in the charging while the engine is running.
lf the monitor lamp flashes, check the V-belt tension. abnormality is found, see “16.6 OTHER TROUBLE”. system If any AD313350 REMARK While the starting switch is ON, the lamp will remain lit and will go off once the engine is started. 2. FUEL LEVEL If the fuel drops below 45 liters (11.9 US gal, 9.9 UK gal), the lamp will flash. Top up the fuel before this. AD313360 2-7