TESTING AND ADJUSTING FUEL SYSTEM (CALIBRATION DATA) 615002 12-12-15 8 12-12-15 9 Injection Pump Assembly Number Applicable Machine Applicable Engine 6152-72-1810 (106675-4312) Model Serial No. Model Serial No. ( ): Injection pump manufacturer’s part No.
FD430-2 SA6D125-2 Injection Injection pump Pump Type Manufacturer PE-P(PS3S) ZEXEL Injection pump specification Engine Specification Rotating direction Counterclockwise Flywheel horsepower (kW {HP}) / rpm) 227 {304}/2,100 (Gross) Injection order 1 – 5 – 3 – 6 – 2 – 4 Maximum torque (Nm {kgm}/ rpm) 1,190 {121}/1,400 (Gross) Injection interval 59°30’ – 60°30’ High idling speed (rpm) 2,250 – 2,350 Plunger pre-stroke (mm) 3.75 – 3.85 Low idling speed (rpm) 800 – 850 Delivery valve (mm3/st) 100 Pump tester capacity retraction volume Motor 7.5 kW for Service standard Calibration Standard ( ): Injection pump manufacturer’s part number Applicable Machine Applicable Engine Model Serial No.
Model Serial No. 430-2 SA6D125-2 Conditions Nozzle & nozzle holder part No. Nozzle part No. ‡ Service standard indicates data Nozzle holder part No. using calibration Injection pipe (mm) test parts. (Outside dia. x inside dia. x length) ‡ Manufacturer Test oil standard is data Oil temperature (°C) for factory test. Nozzle opening pressure (MPa{kg/cm2}) Transfer pump pressure (kPa{kg/cm2}) Service standard Manufacturer standard (105780-8140) 6152-12-3100 (105111-4550) (105780-0000) 6152-12-3120 (105041-7120) (105780-2080) (105041-7130) 8 x 3 x 600 6 x 2.2 x 750 ASTM D975 No.
2 diesel fuel or equivalent 40 to 45 17.2 {175} 27.5 {280} 157 {1.6} 157 {1.6} Injection volume ‡ Rack positions B to E are the reference volume when adjusting the injection volume.
Rack point A (Basic point) B C D E 10 Rack Pump position speed (mm) (rpm) Service standard (cc/1000 st.) Manufacturer standard (cc/1000 st.) Average injection quantity Maximum variance between cylinder Average injection quantity bet Maximum variance ween cylinder 9.0 1,050 161 – 165 ±3 9.4 700 176 – 182 – 6.1 340 28 – 32 ±15 – – – – – – .1 – 10.3 100 150 – 170 Governor performance curve Boost compensator performance curve Injection Pump Type Injection pu Manufactur PE-P(PS3S) ZEXEL Rotating direction Counterclockwise Injection order 1 – 5 – 3 – 6 – 2 – 4 Injection interval 59°30’ – 60°30’ Plunger pre-stroke (mm) 3.75 – 3.85 Delivery valve (mm3/st) retraction volume 100