Mitsubishi SA6D125 — FUEL INJECTION PUMP CALIBRATION DATA

TESTING AND ADJUSTING FUEL SYSTEM (CALIBRATION DATA) Injection Pump Assembly Number 615002 12-12-18 8 6152-72-1390 (106675-4291) Applicable Machine Applicable Engine 6152-72-1391 (106675-4292) 6152-72-1392 (106675-4295) Model Serial No. Model Serial No. ( ): Injection pump manufacturer’s part No. DCA-300SSK SA6D125-2 Injection Injection pump (MQ generator) Pump Type Manufacturer PE-P(PS3S) Injection pump specification Engine Specification Rotating direction Counterclockwise Flywheel horsepower (kW {HP}) / rpm) 269 {360}/1,800 (60 Hz, Gross) Injection order 1 – 5 – 3 – 6 – 2 – 4 Maximum torque (Nm {kgm}/ rpm) — Injection interval 59°30’ – 60°30’ High idling speed (rpm) Max.

1,890 (60 Hz) Plunger pre-stroke (mm) 3.75 – 3.85 Low idling speed (rpm) 700 – 800 Delivery valve (mm3/st) 100 Pump tester capacity retraction volume Motor 7.5 kW for Service standard Calibration Standard ( ): Injection pump manufacturer’s part number Applicable Machine Applicable Engine Model Serial No. Model Serial No. DCA-300SSK (MQ generator) SA6D125-2 Conditions Nozzle & nozzle holder part No. Nozzle part No. ‡ Service standard indicates data Nozzle holder part No. using calibration Injection pipe (mm) test parts. (Outside dia. x inside dia. x length) ‡ Manufacturer Test oil standard is data Oil temperature (°C) for factory test.

Nozzle opening pressure (MPa{kg/cm2}) Transfer pump pressure (kPa{kg/cm2}) Service standard Manufacturer standard (105780-8130) 6152-12-3200 (105111-4560) (105780-0050) 6152-12-3220 (105025-0680) (105780-2090) 6152-12-3110 (105041-7130) 8 x 3 x 600 6 x 2.2 x 720 ASTM D975 No. 2 diesel fuel or equivalent 40 to 45 17.2 {175} 27.5 {280} 157 {1.6} 157 {1.6} Injection volume ‡ Rack positions B to E are the reference volume when adjusting the injection volume. ‡ Marks fl are average volumes.

Rack point A (Basic point) B C D E Rack position (mm) Pump speed (rpm) Service standard (cc/1000 st.) Manufacturer standard (cc/1000 st.) Injection volume Maximum variance between cylinder Injection volume Maximum variance between cylinder 10.7 900 fl320 – 326 ±3 fl255 11.3 900 fl355 – 363 – fl280 Approx. 5. 5 375 fl15 – 18 ±15 fl15 10.7 750 fl315 – fl265 Governor performance curve Flywheel horsepower (kW {HP}) / rpm) 269 {360}/1,800 (60 Hz, Gross) Maximum torque (Nm {kgm}/ rpm) — High idling speed (rpm) Max. 1,890 (60 Hz) Low idling speed (rpm) 700 – 800 Pump tester capacity for Service standard Motor 7.5 kW