Chapter 5. ENGINE MANAGEMENT SYSTEM (EMS) General Information Specifications SECM and Sensor/Switch Inputs G643(E) Service Manual Chapter 5.
Engine Management System (EMS) 140 Components Q’ty Items Specifications G643E G643 Environmental / Electrical Specifications None None Ambient Operating Temperature Operating Voltage -20 °F to 221°F [-29 °C to 105 °C] 8-16 Vdc Engine Control Module (SECM ) 1 1 Operating Temperature Operating Voltage Operating Environment -20 °F to 221°F [-29 °C to 105 °C] 8-16 Vdc SECM microprocessor may reset at voltages below 6.3 Vdc On-engine mounting, underhood automotive Crankshaft Position Sensor 1 None Type Tooth wheel VR sensor 3X TMAP Sensor 1 1 MAP sensor Intake Air Temp Sensor Piezo- Resistivity type 0-5V output Thermistor type (built in MAP sensor) 2.0-3.0kohms at 20°C LP Fuel Temperature Sensor 1 None Type Resistance Thermister 2.5kΩ@20℃ 243Ω@90℃ Oxygen Sensor 2 None Type Output Voltage Zirconia Sensor (Heated) 0 - 1V Coolant Temperature Sensor 1 1 Type Resistance Thermistor Type 1.0-4.0 kohms at 20°C Acceleration Pedal Angle Sensor 1 1 Type APP1(Low idle) APP2(Low idle) APP1(Hi idle) APP2(Hi idle) Hall IC 0.4 ± 0.1 V 4.5 ±0.1 V 3.6 ±0.15 V 1.39 ± 0.15 V Engine Oil Pressure Switch 1 1 Actuation Pressure 0.3 +/- 0.1 kgf/cm^2 Transmission Oil Temperature Switch 1 1 Actuation Temperature 125°C Ground speed limit device option option Sensor Controller Magnetic Pick-up Digital output