Doosan G643 LP Engine — Doosan G643 LP Engine User Manual

LP Fuel Temperature Sensor [G643E] Location [Harness Connectors] Description The LP Fuel Temperature Sensor (FTS) is located in the LP fuel passage of the LP mixer for detecting the LP fuel temperature. The FTS uses a thermistor whose resistance changes with the temperature. The electrical resistance of the FTS decrease as the temperature increase, and increase as the temperature decrease. The reference 5V in the ECM is supplied to the FTS by way of a resister in the ECM. That is, the resistor in the ECM and the thermistor in the FTS are connected in series. When the resistance value of the thermistor in the FTS changes according to the LP fuel temperature, the output voltage also change.

Circuit Diagram [ G643E ] Inspection 1. Remove the LP fuel temperature sensor from the adapter connected to LP mixer. 2. With the temperature sensing portion of the LP engine fuel temperature immersed in hot water, check resistance. 3. If the resistance deviates from the standard value greatly, replace the sensor. G643(E) Service Manual Chapter 5. Engine Management System (EMS) 189 Temperature °C (°F) FTS Resistance (Ohms) -20(-4) 15462 0(32) 5896 20(68) 2498 40(104) 1175 60(140) 596 80(176) 323