Doosan G643 LP Engine — Doosan G643 LP Engine User Manual

DIAGRAM NOTES Trim valves must be positioned 1 N-2007 Regulator 8 Solenoid (AFS Lock Off Valve) 1 vertically with flow arrows in position shown Plastic WYE Fitting (black color) Brass Tee Fitting.

1/4 Tube x 1/8 Fuel outlet must be min 15 ° below horizontal position 2 for 7/32” (5.56mm) ID Tube Hose 9 NPTF x 1/4 Tube 2 3 10 Valve (TEV Bosch Canister) CA100 Mixer 3 vapor fuel line between mixer and Only one 90 ° fitting permissible on Plastic WYE Fitting (blue color) 11 1/4” (6.35mm) hose barb to 1/8” regulator (As shown the temp sensor adaptor is considered the one 90 ° fitting.) 4 for 7/32” (5.56mm) ID Tube (3.2mm) male pipe, 125HBL, .062 flow ID Hose 12 1/4-28 UNF x 1/4” (6.35mm) 4 Vapor fuel fittings (regulator and mixer) must have minimum ID of 5 Adapter (temperature sensor) hose barb 0.46” (11.68mm) 6 Sensor (coolant, temperature) 8 Vapor hose length to be as short as possible and have no restrictions for 7 Nipple (.625 hex 4mp, 2.5L steel) best regulator performance G643(E) Service Manual Chapter 6.

LPG FUEL DELIVERY SYSTEM 195