Doosan G643 LP Engine — Doosan G643 LP Engine User Manual

8. If the FTV duty cycle reading is above 55% adjust the idle adjustment screw outward and re-check the duty cycle reading. Continue to do this until the FTV duty cycle reading is within the optimum range (45-55%). DO NOT adjust the screw so far outward that the tamper proof cap cannot be installed. A duty cycle measurement at Closed Loop Idle of 40-60% is acceptable if the optimum range of 45-55% cannot be reached through adjustment. If the FTV duty cycle cannot be adjusted below 60%, the mixer is faulty and should be replaced. NOTE : If the FTV Duty Cycle reading is NOT between 25-60%, check for possible vacuum leaks, manifold leaks, or a faulty mixer. 9.

Turn the ignition key to the OFF position to shut down the engine. 10. Install the tamper proof cap on the idle mixture screw adjustment port using a large pin punch, so that no further adjustments can be made (Figure 42). G643(E) Service Manual Chapter 6. LPG FUEL DELIVERY SYSTEM 204