Doosan G643 LP Engine — Doosan G643 LP Engine User Manual

Hose Connections Proper operation of the closed loop control greatly depends on the correct vacuum hose routing and fuel line lengths. Refer to the connection diagram below for proper routing and maximum hose lengths when reinstalling system components. NOTE: Preferred mounting of regulator is off engine. Hose Specifications Vacuum hose to comply to SAE 1403 Type I or SAE J30 R7 R8 / EPDM textile reinforced / -40˚ F to +257˚ F (-40˚ C +125˚ C / Inside Diameter: 7/32” (5.56mm) DWG NO 5555-1236 Figure 25.

Hose Connections for G643 Engines DIAGRAM NOTES Fuel outlet must be positioned vertically in the down position Only one 90 fitting permissible on vapor fuel line between mixer and regulator Vapor fuel fittings (regulator and mixer) must have minimum ID of 0.59” (14.99mm) Vapor hose length to be as short as possible and have no restrictions for best regulator performance 1 2 3 5 G643(E) Service Manual Chapter 6. LPG FUEL DELIVERY SYSTEM 210