Doosan G643 LP Engine — Doosan G643 LP Engine User Manual

N2001 Disassembled Service 1. Clean the primary and secondary valves with soap and warm water to remove heavy-end deposits. Inspect the valve seats and o-rings for wear. Replace worn components as necessary. 2. Clean the primary and secondary diaphragms with soap and warm water. Inspect for wear, tears or pinholes and deformations that may cause leaks or poor performance of the regulator/converter. . 3. Replace the body gasket of the coolant chamber and body o-ring seal when servicing the N2001 to avoid coolant leaks from the fuel expansion chamber to the coolant passage. 4. Clean the regulator body (casting) with a parts cleaning solvent.

Be sure to remove all seals and gaskets before cleaning the casting with solvent. Figure R11 5. Make sure all parts (Figure R11) are completely dry before re-assembly. G643(E) Service Manual Chapter 6. LPG FUEL DELIVERY SYSTEM 226