Doosan G643 LP Engine — Doosan G643 LP Engine User Manual

Excessive Exhaust Emissions or Odors Vehicle has high CO emissions. NOTE: Excessive odors do not necessarily indicate excessive emissions. PRELIMINARY CHECKS Verify that no stored codes exist. If emission test shows excessive CO and HC, check items that cause vehicle to run rich. If emission test shows excessive NOx, check items that cause vehicle to run lean or too hot. Related MIL Faults: Low side driver Fuel adapt faults EST faults G643(E) Service Manual 247 Chapter 7. Basic Troubleshooting PROBABLE CAUSE CORRECTIVE ACTION Cooling system malfunction If the Service tool indicates a very high coolant temperature and the system is running lean: • Check engine coolant level.

• Check engine thermostat for faulty part (always open) or for wrong heat range. • Check fan operation Fuel system malfunction If the system is running rich, refer to “Diagnostic Aids” chart on the next page. If the system is running lean, refer to “Diagnostic Aids” chart on the next page. Check for properly installed fuel system components. Check fuel pressure. Ignition system malfunction Check ignition timing. Refer to application manual. Check spark plugs, plug wires, and ignition components. Component malfunction Check for vacuum leaks. Check for contamination for catalytic converter (look for the removal of fuel filler neck restrictor). Check for carbon build-up.

Remove carbon with quality engine cleaner. Follow instructions on label. Check for plugged PCV valve. Check for stuck or blocked PCV hose. Check for fuel in the crankcase.