Cold Weather Starting B3.9, B4.5, and B5.9 Industria [...] Page 1-8 Section 1 - Operating Instructions This illustration shows a typical series battery connection. This arrangement, positive (+) to negative (-), doubles the voltage. NOTE: Always reference the relevant OEM literature for jump starting procedures. Failure to follow correct procedures can result in damage to the ECM and other electrical equipment. Cold Weather Starting General Information Follow the Normal Starting Procedures in this section in cold weather. The Wait-To-Start lamp will stay on longer.
With Mechanical or Electrical Metering Equipment (Ether) Disengage the driven unit, or if equipped, put the transmission in neutral While cranking the engine, inject metered amounts of starting fluid Engine oil pressure must be indicated on the gauge within 15 seconds after starting.