QSB4.5 and QSB6.7 Lubricating Oil Recommendations and Specifications Section V - Maintenance Specifications Page V-9 Cummins Inc. recommends the use of a high-quality SAE 15W-40 heavy-duty engine oil, such as Valvoline Premium Blue™, which meets or exceeds the American Petroleum Institute (API) performance classification CH-4/SJ or CI-4/ SK and the Association des Constructeurs Europйen d'Automobiles (A.C.E.A.) performance classification E5 or E7. A sulfated ash limit of 1.0 mass percent is suggested for optimum valve and piston deposit, and oil consumption control. The sulfated ash must not exceed 1.85 mass percent.
Special “break-in” oils are not recommended for use in new or rebuilt Cummins® engines. Use the same lubricating oil that will be used in normal engine operations. Cummins® Engineering Standard Classifications (CES) American Petroleum Institute Classification (API) European Classification (ACEA) Comments API CD API CE ACEA E-1, ACEA E-2 OBSOLETE. DO NOT USE. CES-20075 API CF-4/SG, API CG-4/SH ACEA E-3 Minimum acceptable oil classification for Midrange engines. (1) CES-20071, CES-20072, CES-20076, CES-20077 API CH-4/SJ ACEA E-5, E-7 Good oil classification for Midrange engines without EGR. CES-20078 API CI-4/SK Excellent oil for Midrange engines. 1.
CG-4/SH and E-3 oils can be used in areas where none of the recommended oils are available, but the oil drain interval must be reduced by one half of the interval given in the maintenance schedule. See the oil drain interval information in Section 2.