OPERATION Combustion noise occasionally changes to breath- Unusual combustion noise or mechanical noise. ing sound. l Replace with specified fuel. l Replace the nozzle. l Check over-heating. l Replace the muffler. l Adjust valve clearance. CHASSIS TRANSMISSION PARKING BRAKE Engine is running but machine will not move. Brake does not work properly. l Release parking brake. l Put directional lever in position properly. l Adjust linkage. l Clean brake pad. l Add oil to transmission case to the specified level. l Replace spring in air cylinder. Even at full throttle, machine moves slowly and lacks power. l Adjust or replace brake pad. l Add oil to transmission case to the specified level.
STEERING l Disassemble transmission strainer and clean. Steering wheel is heavy. Oil overheats. l Adjust steering gear. l Add oil to transmission case to the specified level or drain oil. l Check linkage, replace parts. l Use a suitable gear speed. l Reduce time using torque converter at stall speed. EQUIPMENT HYDRAULIC SYSTEM l Check engine. Abnormal noise is produced. Bucket lacks lifting power. Bucket lifting speed is slow. l Add oil to transmission case to the specified level. l Add oil. l Replace filter in hydraulic tank. DRIVE AXLES Many bubbles form in oil. l Replace with specified oil. Abnormal noise is produced. l Add oil to axle housing up to proper level. l Add oil.
l Bleed air from oil line. Oil pressure is too low. WHEEL BRAKES l Add oil and bleed air. Brakes do not work when pedal is depressed. Cylinder vibrates when operating. l Raise air pressure to specified level. l Replace discs. l Add oil. l Add brake oil to the specified level. l Bleed air from brake system. Brake drags or stays applied. l Clean exhaust hole of treadle valve. l Clean breather of power cluster. l Check and repair slack adjuster. Brake slips. l Replace discs. 2-75