Komatsu — MAINTENANCE GUIDELINES

MAINTENANCE Fire prevention: Use a nonflammable cleaner or light oil for cleaning parts. Keep flame or cigarette light away from cleaning fluid Clamping faces: When O-rings or gaskets are removed, clean the clamping faces and replace the O-rings and gaskets with new ones. Be sure to properly fit the O-rings and gaskets when assembling. Objects in your pockets: Keep your pockets free of loose objects which can fall out and drop into the machinery; especially when you work on the machinery while bending over it. Cleaning machine: l Do not direct a high-pressure jet directly at the radiator. l Do not splash water on the electrical components. Pre- and post-work checks:

Before starting work in mud, rain, snow or at the seashore, check plugs and drain valves for tightness. Wash the machine immediately after the work to protect components from rusting. Lubricate components more frequently than usual. Be sure to lubricate work equipment pins daily if they are submerged in water. Dusty worksites: When working at dusty worksites, do as follows: l Check the air cleaner for clogging more frequently. Clean the air cleaner at shorter intervals than specified. l Replace the fuel filter(s) frequently. l Clean the radiator core frequently to avoid clogging. l Clean electrical components, especially the cranking motor and alternator, to avoid accumulation of dust.

Avoid mixing oils: Never mix oils of different brands. If you have only oil which is a different brand from the one that is used in the machine, do not add it but replace all the oil. 3-3