Komatsu — PARKING BRAKE

MAINTENANCE PARKING BRAKE If the effect of the parking brake is poor, adjust it in the following manner. A WARNING! When adjusting the parking brake, always place blocks or chocks under the tires to prevent the machine from mov- ing. A WARNING! To prevent the parking brake from being applied automatically during adjustment, provide and maintain sufficient air pressure at the brake air cylinder, using an external air pressure source. Also, attach a warning tag to the parking brake switch to prevent other people from operating the parkin brake by mistake. 1. Move the parking brake switch to OFF to release the parking brake. 2.

Turn adjustment bolt (2) clockwise while pressing on bolt retainer (1) until brake pads (3) come in contact with brake disc (4) on both sides. 3. Turn adjustment bolt (2) one half turn counterclock- wise while pressing on bolt retainer (I). Release the bolt retainer and comfirm that the retainer is in the locking position with the adjustment bolt. d 4 L04BHOl’ When the brake pad lining wears to a thickness of 3 mm (0.11 in) or less, replace the pads. 3 mm 0.11 in * Replace the two brake pads as a set at the same time. * Contact your distributor for brake pad replacement. A WARNING! Do not get any oil or grease on the surfaces of the brake pads or disc. L04BH012 3-33