MAINTENANCE BRAKE OIL LEVEL 1. Check the brake oil level in oil tank (I), located on the left side of the machine. The oil level should be between the “MAX” and “MIN” oil level marks on the tank. i 2. If necessary, remove oil filler cap (2) and refill with engine oil. The type of engine oil used depends on the ambient temperature. Select oil according to the table under “LUBRICANTS, FUEL AND COOLANT” in this section. A * WARNING! Always use engine oil to refill the brake oil tank. LO4A FUEL FILTER/WATER SEPARATOR With the engine shut-off, open the drain valve. Turn the valve counterclockwise approximately l-112 to 2 turns until draining occurs.
Drain the filter sump of water until clear fuel is visible. * Do not overtighten the valve. Overtightening can damage the threads. * Turn the valve clockwise approximately l-1/2 to 2 turns to close the drain valve. L12BM005 3-42