Komatsu — REPLACEMENT

MAINTENANCE REPLACEMENT A WARNING! Do not remove the radiator cap when the engine coolant is hot. Hot coolant will cause serious personal injury. Remove the radiator cap and close the shutoff valves, before removing the coolant filter. Failure to do so can result in personal injury from heated coolant spray. 1. Open the engine side access door on the left side of the machine. 2. Remove the radiator cap. Close the shutoff valve (1). 3. Clean the area around the coolant filter. 4. Using a filter wrench, remove the coolant filter by turning it counterclockwise. Discard the filter in a suitable manner if is not needed for any reason. 5. Clean the filter gasket surface of the filter header. 6.

Apply a thin coat of clean engine oil to the seal of the new filter. * Do not allow the engine oil to get into the filter because it will adversely affect the SCA concentra- tion level. I 1 LlZAMOl( 3-53