Komatsu — WATER PUMP

MAINTENANCE ENGINE MOUNTED HOSES Check the lubricating oil, cooling and fuel system hoses and hose connections for leaks and/or deterioration. Particles of deteriorated hose can be carried through the related system and restrict or clog small passages, especially the radiator core or lubricating oil cooler, and partially stop circulation. Replace hoses, hose fittings and clamps as necessary. ENGINE MOUNTING HARDWARE Check the torque on the mounting bolts and nuts. Retighten any that are loose. Inspect the rubber mount- ing cushions for deterioration and/or age hardening. Replace any broken or missing mounting hardware and/or damaged mounting cushions. _k Tightening torques:

Mounting cushion bolts and nuts 67.5-84.5 kgm (488-611 Ibf ft / 662-828 Nmm) Front mounting bracket bolts Standard torque Rear mounting bracket bolts and nuts 25-31.5 kgm (181-228 Ibf ft/ 245-309 Nem) TURBOCHARGER MOUNTING Check the turbocharger mounting nuts annually. Tighten the mounting nuts. * Tightening torque: 4.8 kgm (35 Ibf ft / 48 N*m) WATER PUMP Check the engine water pump. For the detailed procedure, refer to the Engine Operation and Maintenance Manual. 3-67