MAINTENANCE CAB AIR FILTER - IF EQUIPPED Replace the cab air filter as follows: * Be sure the cab blower fan is stopped before replac- ing the filter. 1. Open the access doors located at the rear of the cab to gain access to the filter element. 2. Remove holder mounting knobs (I), holder (2) and spacers (3) holding filter (4). Pull out the filter ele- ment and discard it. 3. Install the new filter element with the arrow pointing inward. 4. Install filter holder (2), spacers (3) and mounting knobs (1). 5. Close the access doors located at the rear of the cab. 1. Holder mounting knob 2. Filter holder 3. Holder mounting spacer 4. Fresh air filter 5. Thumb screw 6. Retainer 7.
Outer access panel 8. Recirculating air filter 9. Inner access panel 10. Retainer 11. Filter box DRIVE AXLE OIL * Use the same procedure front and rear drive axles. to change the oil for the 1. Remove front and rear oil filler plugs (I), then re- move oil drain plugs (2) to drain the oil. 3-72