OPERATION 2. Engine Oil Level Monitor This monitor indicates a low oil level in the engine oil pan. If the monitor lamp flashes, check the oil level in the engine oil pan and add oil as required. 3. Engine Coolant Level Monitor This monitor indicates a low radiator coolant level. If the monitor lamp flashes, check the coolant level and add coolant as required. * Park the machine on level ground and check the monitor lamps. * Confirm that these monitor lamps light for about 3 seconds after turning the starting switch to ON. If any monitor lamp does not light, ask your distributor to inspect that monitor lamp. B.
CAUTION MONITOR LAMP GROUP (Caution items) * Even if any monitor lamp flashes, the machine can operate, but it should be repaired as soon as possible. 1. Charge Monitor This monitor indicates an abnormality in the charging system while the engine is running. If the monitor lamp flashes, check the charging circuit. I- I I j, This monitor lamp flashes and the alarm buzzer sounds, when the starting switch is turned to ON. This monitor lamp and warning lamp (E) may flash when the engine is started or when the engine is running. However, if the lamps go out when the engine is accelerated momentarily, there is no abnormality. 2-6