Komatsu — Brake Line Failure Monitor

OPERATION 2. Fuel Level Monitor This monitor indicates there is less than 80 liters (21.1 gallons) of fuel in the tank. m A If the monitor lamp flashes, add fuel. 3. Transmission Oil Filter Monitor This monitor indicates clogging of the transmission oil filter. 4 0 If the monitor lamp flashes, replace the filter element. -- 0 _k Park the machine on level ground and check the monitor lamps. * Confirm that these monitor lamps light for about 3 seconds after turning the starting switch to ON. If any monitor lamp does not light, ask your distributor to inspect that monitor lamp. C.

CAUTION MONITOR LAMP GROUP (Emergency stop items) * If any monitor lamp flashes, stop the engine and correct the problem immediately. 1. Brake Line Failure Monitor This monitor indicates a drop in brake oil pressure when the brakes are operated. If the lamp flashes, stop the machine immediately and check the brake system. * After checking and repair of brake system, push in over-stroke sensor rod on the brake chamber. If this operation is not done, a buzzer and lamp will con- tinue to warn of brake line trouble. 2-7