OPERATION HYDRAULIC TANK FILLER CAP A locking filler cap is located on the hydraulic tank filler opening. Open and close the locking cap as follows, using the starting switch key: To open the cap 1. Insert the key into the cap. * Insert the key as far as it will go up to the shoulder. If the key is turned before it is inserted all the way, it may bent or break. 2. Turn the key counterclockwise and bring the rotor groove in line with the aligning mark on the cap. Turn the cap slowly until a “clicking” sound is made. This releases the lock and allows the cap to be opened. To lock the cap 1. Turn the cap into place. 2. Turn the key clockwise and take the key out.
* When the cap is locked against vandalism, it rotates freely. Shoulder LO222054 Aligning mark 2-40