Komatsu — CHECKS BEFORE STARTING

OPERATION CHECKS BEFORE STARTING ENGINE Pre-operation checks forestall machine trouble. Never neglect them. WALK AROUND CHECK Before starting the engine, check around and under the machine to check for loose nuts or bolts, collection of dirt, or leakage of oil, fuel, or coolant, and check the condition of the work equipment and hydraulic system. Check also for loose electrical wiring, play, and collection of dirt at places that reach high temperatures. I. Check bucket for wear. 2. Check tires for wear and damage. 3. Check transmission case joints for oil leak. 4. Check brake system for air leak and/or oil leak. 5. Check tightness of air cleaner mounting hardware. 6.

Check tightness of battery terminals. 7. Check radiator for coolant leak. 8. Check engine for coolant and/or oil leaks. 9. Check drive axles for oil leaks. 10. Check hydraulic tank for oil leak. 11. Check for oil leaks at high pressure hydraulic hoses, hose connections and hydraulic cylinder seals. CHECKS BEFORE STARTING In addition to the walk around check, the following checks should be performed before starting the engine. * For the detailed procedures of the following checks, refer to “CHECKS BEFORE STARTING ENGINE’ in Section 3. 1. Check coolant level and refill 2. Check engine oil level and refill 3. Check fuel level and refill 4. Check air cleaner service indicator 5.

Drain water from air tanks 6. Check brake oil level and refill 7. Drain fuel filter/water separator 8. Check engine fan 9. Check drive belts 10. Check monitor panel 11. Check electrical wiring 12. Check parking brake function 13. Check wheel brake function 14. Check horn function 15. Check lamp function 16. Check rear view mirrors 17. Check engine exhaust gas color 18. Check instrument and gauge function 19. Check steering 20. Check back-up alarm function 2-41