OPERATION 2. Go over the spread soil with the bucket teeth touching the ground and level the ground by back-dragging. 3. Scoop some more soil into the bucket, put the lift arm in float, level the bucket at ground level, and smooth the ground by moving backward. * Always move the machine backward during leveling operations. A WARNING! If leveling by forward travel can not be avoided, do not dump the bucket beyond 20”. This will prevent quick wear and damage of the work equipment and frame. LOAD AND CARRY OPERATIONS Load and carry operation is a series of processes (scooping - carrying - loading to a hopper or glory hole) carried out by the wheel loader.
_k Always maintain the road in good condition. A WARNING! Lower the bucket to bring down the center of gravity when carrying material. LOADING Select and proceed effective operation which avails less turning and the shortest hauling distance according to ground conditions. Cross Drive Loading When a wheel loader is operated, the digging should be made at a right angle toward accumulated soil. When the scooping is completed, the machine should be traveled backwards as it is. Then, bring the truck between the accumulated soil and the wheel loader for the purpose of loading A upon the dump truck. WARNING! Provide a flat road free of rocks and hollows.
When the boom is raised with the bucket loaded, do not make quick turns or quick braking because it is very danger- ous. A WARNING! Do not load the bucket by thrust- ing into a pile of soil or gravel at high speed because it is dangerous. Ll7CZO22 2-57