Komatsu — 250 HOUR LUBRICATION AND MAINTENANCE CHECKS

OM4036 Lubrication & Service - Section 40 Page 40-9 250 HOUR LUBRICATION AND MAINTENANCE CHECKS The 10 hour lubrication and maintenance checks should also be performed at this time. NOTE: “Lube Key” references are to the Lubrication Chart. 1. 2. (CONTINUED NEXT PAGE) Truck Serial Number Site Unit Number Date ______________________ _______________ _______________ Hourmeter Name of Service Technician _____________ ___________________________________ TASK COMMENTS CHECKED INITIALS ENGINE - Refer to Cummins Operation & Mainte- nance manual for complete specifications regarding engine lube oil specifications. NOTE:

If the engine is equipped with the *Centinel™ oil system and/or the Eliminator™ filter system, engine oil and filter change intervals are extended beyond 250 hours. Refer to Cummins Operation & Maintenance manual for specific oil and filter change intervals. * The Centinel™ system is a duty-cycle-dependent lubrication management system whereby oil is blended with the fuel and burned and an extension of oil change intervals can occur. a. Change engine oil. Lube Key “A”. b. Replace lube oil filters. NOTE: When installing spin-on filter elements, follow the instructions as specified by the filter manufacturer. The tightening instructions are normally printed on the outside of the filter.

Do not use a wrench or strap to tighten filter elements. c. If the truck is equipped with a reserve engine oil tank, change the reserve tank oil filter. d. Check belt tension and condition of each accessory belt. Refer to Cummins Operation & Maintenance manual for specific adjust- ment instructions. e. Check the torque on the mounting capscrews on cooling fan (1, Figure 40-5). Tighten eight capscrews (2) to 175 ft.lbs. (237 Nm). COOLING SYSTEM - a. COOLANT MIXTURE - Check for proper coolant mixture. Add coolant as required. b. COOLANT FILTERS - Change coolant filters. c. COOLING SYSTEM HOSES - Check cooling system hoses for damage and signs of deteri- oration.

Refer to the Cummins maintenance manual for cool- ant filter replacement instructions and proper coolant mixture instructions.