Komatsu — F-N-R Selector Switch

Operator Cab And Controls - Section 32 OM3202 Page 32-6 CENTER CONSOLE The center console (1, Figure 32-3) contains: (1) Center Console (2) F-N-R Selector Switch (3) Hoist Control Lever (4) Ash Tray (5) Cigar/Cigarette Lighter (6) L.H. Window Control Switch (7) R.H.

Window Control Switch (8) Engine Shutdown Switch (9) Override/Fault Reset Switch (10) Blank - Not Used on this truck (11) RSC Switch (12) Retarder Speed Control Dial (13) Propulsion System Controller (PSC) Diagnostic Port (14) Engine Diagnostic Port (CENSE) (15) Truck Control Interface (TCI) (16) Passenger Seat (mounted on top of the right hand portion of the Console structure) (17) Engine Diagnostic Port (QUANTAM) (18) Modular Mining Port (Optional) FIGURE 32-3. CENTER CONSOLE F-N-R Selector Switch Selector switch (2, Figure 32-3) is mounted on a con- sole to the right of the operator's seat. It is a three position switch that controls the forward-neutral- reverse motion of the truck.

When the selector switch handle is in the center "N" position, it is in NEUTRAL. The handle must be in NEUTRAL to start the engine. The operator can select FORWARD drive by moving the handle forward. REVERSE drive can be selected by moving the handle to the rear. The truck must be stopped before the selec- tor handle is moved to a drive position. drive e ovin g selec- .