Komatsu — Heater/Air Conditioner Vents

OM3202 Operator Cab And Controls - Section 32 Page 32-11 HEATER / AIR CONDITIONER COMPART- MENT AND CONTROLS Heater/Air Conditioner Selector Switch Selector switch (6, Figure 32-3) allows the operator to select heat or air conditioning, or neither. The left position of the switch activates the air conditioning and the right side of the switch activates the heater. The middle position is the OFF position. Neither the heat nor the air conditioning can be activated in this position. The heater/air conditioner compartment contains the heater/air conditioner controls (6, Figure 32-1) and some of the heater/air conditioner components, such as the blower motor assembly and heater coils.

Opti- mum cab air climate can be selected by using the fol- lowing controls in various combinations. Defroster Vent Control Switch Heater/Air Conditioner Vents Defroster control switch (1, Figure 32-6) directs heated air for windshield defrosting. The "down" position of the toggle switch is OFF. The "up" position of the toggle switch is ON. Heater/air conditioner vents (7, Figure 32-3) may be rotated 360°. Air flow through the vents is controlled by manually opening/closing or turning the louvers. Outside/Inside Air Control Switch Outside/inside air control switch (2, Figure 32-3) allows either outside or inside air to be circulated through the cab heater assembly.

Moving the switch “up” directs outside air to be circu- lated through the heater assembly and through the cab. Moving the switch “down” directs inside air to be recirculated through the heater assembly. Heater Control Switch Heater control (3, Figure 32-3) directs heated air to the cab floor for heating of the cab. The ”down” posi- tion of the toggle switch is OFF. The “up” position of the toggle switch is ON. Temperature Control Knob Temperature control knob (4, Figure 32-3) allows the operator to select a comfortable temperature. Rotating the knob counter-clockwise (blue arrow) will select cooler temperatures. The full counter-clock- wise position is the coldest air setting.

Rotating the knob clockwise (red arrow) will select warmer temperatures. The full clockwise position is the warmest heater setting. Fan Control Knob Fan control knob (5, Figure 32-3) controls the cab air fan motor. The fan motor is a 3-speed motor (low, medium and high). Speeds are selected by rotating the control knob clockwise to the desired position. OFF is the full counter-clockwise position. FIGURE 32-6. A/C & HEATER CONTROLS