Operator Cab And Controls - Section 32 OM3202 Page 32-20 Light Switch The instrument panel lights, clearance lights, and the headlights are controlled by this three position rocker type switch (27, Figure 32-7). OFF is selected by pressing the bottom of the switch. Press the top of the switch until it reaches the first detent to select the panel, clearance, and tail lights only. Press the top of the switch again, until it reaches the second detent to select headlights, as well as panel, clearance, and tail lights. Windshield Wiper and Washer Windshield wiper control switch (28, Figure 32-7) is a four position rotary switch with intermit- tent wiper delay and wash feature.
OFF position is the detented position when the knob is rotated fully counterclockwise against the stop. The intermittent wiper position is located between OFF and the first detent position, when rotating the knob clockwise. Rotating the knob closer to the first detent position decreases the time interval between wiper strokes. Rotate the knob clockwise to the first detent position for slow speed. Rotate the knob to the second detent position for fast speed. Press and hold the knob "in" to activate the windshield washer system. Panel Light Dimmer Panel light dimmer control (29, Figure 32-7) is a rheostat which allows the operator to vary the brightness of the instruments and panel lights.
Rotating knob to the full counterclockwise position turns panel lights on to brightest condition. Rotating knob clockwise continually dims lights until OFF position is reached at full clockwise rotation. Payload Meter Switch Payload meter switch (30, Figure 32-7) is a two-way, momentary rocker switch. The top position is the SELECT position. The SELECT position is used to step through the different displays. The lower posi- tion is the SET position. The SET position is used to set the operator ID, or clear the load and total ton counters. Refer to Section 6, Optional Equipment, for a more complete description of the payload meter system and its functions.
r to vary the to brightest ched at full he top position is the ays. The lower posi- he load and total ton ption of the payload