. OPERATION MACHINE OPERATIONS AND CONTROLS remove drain valve (4). according to the above procedure. CARTRIDGE (PAGE 4-57)" or "REPLACE FUEL MAIN 3 - 116 Adjustment of Drain V I f drain val ve (4) is s tiff, coat the O-ring portion of the dr ain valve with grease to make th e movement smooth 1. Turn th e valve ( 6) at the botto m of the f uel tank to th e CLOSE positio 2. Set the containe r to catch the fuel unde r th e pre-filter cartridge. 3. Loose n drain val ve (4), then d rain all the water and s ediment in the tra cartrid nsparent ge (1). cap (2) and also the fuel accumulated in filter 4.
Chec k that noth ing more comes out from drain hose (3), then (Machine of poor fu el arrangeme nt specification) installed. Additional water sep arator (2a) is installed. Drain the w ater and sediment in th e additional water sep arator (2a) 5. Coat O -ring port ion (7) with a suitable amount of gr ease. When doing this , be careful no t to let the grease get s tuck to the drain v alve wate r drain port (8 ) or drain valve thread (9). 6. Tighte n drain va lve (4) by han d until it contacts the bottom of 7. Remo ve the fue l container. 8. Turn t he valve ( 6) at the botto m of the fuel tank to t he OPEN REMARK ding air, see "REPLACE FUEL When blee PRE-FILTE FILTER C ARTRIDG E (PAGE 4-7 0)".