. OPERATION MACHINE OPERATIONS AND CONTROLS WARNING top off the fuel tank in reference Fuel (PAGE 3-122)". If the 1. Open cover (3). 3 - 117 Inspection of Additional Water Separator and Drain of Water and Sediment (Only poor fuel arrangement specification machines) The water separator is a devi ce to separate water mixed with fu el. When d raining water, fuel is dra ined together. Therefore, never bring fire near the drain ing water. When draining water, prepare for a container used for draining o il and take care not to spill drained water. The drained water contains fuel and can catch fi re. If it is spilt, wipe it off complete ly.
NOTICE If float (1) goes above level line (2 ), there is danger that the separated water may be sucked into the engine. at (1) reaches level line (2). Always drain the water before flo Before carring out this wo to"Check Fuel Level, Add scarce, water may not well Prepare a container to cat uel is 2. Put a container under dra in hose (4) to catch drained fu 3. Loosen plug (5) to drain 4. If water is not drained, rem ove air intake plug (6). (Width a cross flats: 14 mm) ough drain hose (4). to flow out after water has been w in water drain plug (5). Then water is drained thr 5. As soon as fuel begins completely drained, scre Tightening torque:
1.5 to 2.5 Nm (0.15 to 0.25 kgm, 1.1 to 1.8 lbft) In case air intake plug (6 install it now. Tightening torque: 8.0 to ) has been removed to drain water, 12.0 Nm (0.8 to 1.2 kgm, 5.8 to 8.7 6. 7. 8. After completing the wate r drain operation, bleed the air . Use the same procedure as w hen replacing the fuel filter cartridge. For details on bleedin g the air, see "REPLACE FUEL E (PAGE 4-57)", "REPLACE FUEL GE (PAGE 4-70)". FUEL PRE-FILTER CARTRIDG FUEL MAIN FILTER CARTRID