Komatsu — LOADING AND UNLOADING WITH TRAILER

. OPERATION TRANSPORTATION Loading bending. 3. Turn the travel speed selector switch to low speed travel (Lo lamp lights up). Press travel speed selector switch (5) to switch the travel speed. The travel speed (Lo, Mi, Hi) is displayed on the travel speed monitor (6). the 3 - 178 1. Load and unload on firm Maintain a safe distance 2. Apply the trailer brakes s ecurely, then put blocks (1 ) unde r the tires to prevent the trailer Set left and right ra equally spaced to the l eft and right of center (3) o f the tr ailer. Make angle of installat ion (4) a maximum of 15 degree s.

If the ramps bend a lar ge amount under the w eight o f the machine, put blocks u nder the ramps to preven t them from 4. Turn auto-deceleration s control dial to set the eng witch (7) OFF and operate the fuel ine speed to low idle. Each time auto-dece switches OFF J ON J When auto-decelerati auto-deceleration mon Each time auto-dece leration switch (7) is pressed, it OFF in turn. on switch (7) is turned OFF, the itor (8) goes out. switches OFF J ON J When auto-decelerati auto-deceleration mon 5. Turn the swing lock switc h ON to apply the swing lock. When the swing lock switch is turned to ON position lights up. osition swing lock monitor (9) (a): ON position (b): OFF position