Komatsu — LOADING AND UNLOADING WITH TRAILER

. OPERATION TRANSPORTATION OPERATION TRANSPORTATION operate any other lever. is turned to ON position, the 3 - 179 6. If t he machine is equipped with work equipment, set the work equipment at the front, and travel forward to load it; if it has no work equipment, travel in re Follow instructions and si when traveling in reverse. 7. Before moving onto the ram ps, make sure that the machine is positioned in a straight lin he centerline of the machine m Align the direction of travel with the ramps and travel slowly Lower the work equipment as far as possible without causing interference. When on the ramps, oper 8.

When loading or unloading a machine with the work equipment installed, at the point where the tracks are on both the ramps and the ground surface, tur n the swing lock switch OFF, then swing the upper structure sl owly 180 degrees. After doing that, drive slowl y in reverse and load the machine onto the trailer. 9. Turn the swing lock switch When the swing lock sw swing lock monitor (9) lig (a): ON position (b): OFF position