MAINTENANCE 21. STANDARD TIGHTENING TORQUES 21 .I INTRODUCTION OF NECESSARY TOOLS The following tools are needed when carrying out maintenance. End wrench - 7/i 6X1/2 End wrench - 9/l 6x518 End wrench - 518x1 i/i 6 End wrench - 3/4x13/1 6 End wrench - 15/16x1 Screwdriver - l/4 shank Screwdriver - 318 shank Ball peen hammer Pry bar - 9/l 6x16 Adjustable wrench Punch - 5/l 6x10 Chisel - 7/8x1 0 Punch - 3/l 6x10 Filter Wrench Removal of filter cartridge For lubrication of machine. If any of the above tools are broken, please order them from your Komatsu distributor. When not using the tools, always put them in the appropriate tool box. 3-15