Komatsu — 20.3.2 DIESEL FUEL SPECIFICATIONS

MAINTENANCE 20.3 FUEL SYSTEM 20.3.1 GENERAL Cleanliness of diesel fuel determines the service life of the fuel injection components. Water and contaminants, allowed to reach precision injection components, cause rapid wear and poor performance. Clean fuel and regular servicing of the fuel tank and fuel filtering components are necessary for long service life. Always clean the area around the fuel tank filler cap before refueling. REMARK Below -12°C (10°F) the paraffin in Grade 2 diesel fuel will change to wax particles and clog the fuel filters. For best results use Grade 1 in cold weather.

Check the solution periodically and at normal operating temperature, to be sure the cooling system has sufficient protection against freezing. Fire hazard - never mix gasoline, gasohol and/or alcohol with diesel fuel. This practice creates an extreme fire hazard and under certain conditions an explosion which could result in personal injury or death. a WARNING Never remove the fuel tank filler cap or refill the fuel tank while the engine is running or hot or when the machine is indoors. Fumes are dangerous, a spark or flame could result in a fire or explosion. A WARNING 20.3.2 DIESEL FUEL SPECIFICATIONS ASTM refers to American Society for Testing and Materials.

The D-396 fuels must also meet the cetane number and sulfur requirements of the D-975 specifications. DIESEL FUEL SPECIFICATIONS Type of Operation Preferred Specifications Normal Service Above -12°C (10°F) ASTM D-975 Grade 2/D ASTM D-396 Grade 2 I Below -12°C (10°F) or Extended Idling I ASTM D-975 Grade 1 -D ASTM D-396 Grade 1 Optionally, the equivalent grades of recognized Federal Government specifications may be used; latest revisions of W-F-800a. 3-14