Komatsu — 24.7.6 OUTSIDE OF RADIATOR CORE

24.7 EVERY 500 HOURS SERVICE 24.7.1 CHECK HOSE CLAMP TORQUE REMARK Check all hose clamps except those on the air intake system. Check the torque, See 21.4 HOSE CLAMPS on page 3-l 9. 24.7.2 CHECK ROPS MOUNTING BOLT NUT TORQUE Check the torque at four places. u Mounting Bolt Nuts _ . . . . 822 +47 N*m (605 235 Ibf ft) 24.7.3 CHECK TRACK SHOE BOLT TORQUE The bolts used for attaching the shoes to the tracks are heat treated alloy bolts and will stand a considerable tightening strain. Ordinary bolts must not be used. Nuts must be assembled so that washer face is not against track link. Radius side of nuts must be against track link. Torque bolts to below listed value. U Track shoe bolt . . . . .

. . . . . 90 40 Narn (65 215 Ibf ft) plus 120” + 120” designates two flats of the bolt head. 24.7.4 INSPECT MOUNTED EQUIPMENT Inspect for operational damage. Correct as required. 24.7.5 RADIATOR LEAKS 1. Check for and correct any leaks at the radiator and its connect- ing parts. 24.7.6 OUTSIDE OF RADIATOR CORE 1. Clean the outside of the radiator core. 3-42