OPERATION 6. Lock the control levers securely with the safety lock lever. 7. Lock the cab, side cover, and engine hood. 8. Put blocks under both ends of the tracks to prevent the machine from moving during transportation, and tie the machine down securely with chains or wire rope of suitable strength. Be particularly careful to fix the machine in position securely so that it does not slip to the side. 13.2.4 REMOVAL, INSTALLATION OF MIRRORS There are mirrors in the positions shown in the diagram on the right. If they are damaged, or when removing and installing them for transportation, do as follows. Removal 1. Loosen lock nut (2) of mirror (1), then remove mirror from support (3). 2.
Loosen bolt (4) and remove support (3) and clamp (5) from the handrail. Installation 1. Install support (3) and clamp (5) on the handrail, then tighten with bolt 2. Install mirror (1) to support, then tighten lock nut (2). 2-93