Komatsu — 20.5 DIESEL FUEL SPECIFICATIONS WARNING

MAINTENANCE 20.2.2 ARCTIC OPERATION If an engine is operated in ambient temperatures consistently below -23 E C (-10 E F) and there are no provisions to keep the engine warm when it is not in operation, use a synthetic engine oil API performance classification CF-4, CG-4, CF- 4/SG or CG-4/SH with adequate low temperature properties such as SAE 5W-20 or 5W-30. The oil supplier must be responsible for meeting the performance service specifications. NOTICE: The use of a synthetic base oil does not justify extended oil change intervals. Extended oil change intervals can decrease engine life due to factors such as; corrosion, deposits and wear.

20.3 DAMPER CASE, SWING MACHINERY CASE, TRACK FRONT IDLERS, TRACK ROLLERS, TOP CARRIER ROLLERS AND HYDRAULIC SYSTEM OIL SPECIFICATIONS Komatsu Engine Oil or engine oil meeting American Petroleum Institute (API) performance classification CF-4, CG-4, CF-4/SG or CG-4/SH or MIL-L-2104D or E is recommended. NOTICE: Classification CD, CE, CD/SF or CE/SF oils may be used in areas where CF-4, CG-4, CF-4/SG or CG-4/SH oil is not yet available. NOTICE: The track front idlers, track rollers and top carrier rollers are lubricated for the life of the component. Lubrication should only be necessary during rebuilding.

20.4 FINAL DRIVE OIL SPECIFICATIONS Komatsu Engine Oil or engine oil meeting American Petroleum Institute (API) performance classification CF-4, CG-4, CF-4/SG or CG-4/SH or MIL-L-2104D or E is recommended. NOTICE: Classification CD, CE, CD/SF or CE/SF oils may be used in areas where CF-4, CG-4, CF-4/SG or CG-4/SH oil is not yet available. 20.5 DIESEL FUEL SPECIFICATIONS WARNING Possible fire hazard - never mix gasoline, gasohol and/or alcohol with diesel fuel. This practice creates an extreme fire hazard and under certain conditions an explosion which could result in personal injury or death.

WARNING Never remove the fuel tank filler cap or refill the fuel tank while the engine is running or when hot or when the machine is indoors. Fumes are dangerous, a spark or flame could result in a fire or explosion. NOTICE: Due to the precise tolerances of diesel fuel injection systems, it is extremely important that the fuel be kept clean and free of contaminants or water. Contaminants or water in the system can cause severe damage to both the injection pump and nozzles. REMARK Below -12 E C (+10 E F) the paraffin in ASTM Grade No. 2-D diesel fuel will change to wax particles and clog the fuel filters. For best results use Grade No. 1-D diesel fuel in cold weather. 3-11